Ductwork Installation & Custom Duct Fabrication in NYC
Hot and cold rooms, weak airflow, or a new AC or heat pump going onto old ducts? We design, fabricate and install ductwork sized to your building, then seal it and verify the airflow is at the correct CFM before we leave. Homes and commercial spaces across all five boroughs.
Calls answered 24/7 · Mon–Fri 7am–4pm · Saturday by appointment
Signs Your Ductwork Is the Problem
A lot of "the AC is broken" calls turn out to be duct problems. The equipment is fine; the air just isn't getting where it needs to go.
- Hot and cold roomsSome rooms never reach the temperature on the thermostat, no matter how long the system runs.
- Weak airflowBarely any air at the far registers, while the ones near the unit blow hard.
- Noisy ductsWhistling, rattling or booming when the system starts. Often undersized or poorly supported ductwork.
- Dust and stuffinessLeaky return ducts pull in dust from walls, ceilings and basements.
- High billsLeaks in unconditioned spaces mean you pay to heat and cool the attic or the ceiling cavity.
- New system, old ductsA new AC or heat pump on ducts sized for an old furnace often underperforms from day one.
What We Do
From one problem run to a full system, residential and commercial.
Custom Duct Fabrication
Ducts built to fit your building's layout, ceiling heights and airflow needs, instead of forcing standard sizes into a space they don't suit.
New Ductwork Installation
Complete duct systems for renovations, additions, new construction and central air or heat pump conversions.
Replacement & Modification
Resizing and rerouting existing ducts so new equipment gets the airflow it was designed for.
Repair & Sealing
Disconnected runs, crushed flex duct, and leaking joints found, repaired and sealed.
Duct Insulation
Insulating ducts in attics, basements and ceiling spaces to cut energy loss and prevent condensation in summer.
Commercial Ductwork
Offices, retail, restaurants and multi-unit buildings. Installed to keep disruption to your business as low as possible.
Which Ductwork Does Your Building Need?
Both have a place. We recommend based on your layout, budget and performance needs, and explain why.
📐 Custom Ductwork
- Built to fit your building's exact layout
- Sized for the airflow each room actually needs
- Fewer joints and transitions, so less air loss
- The right choice for tight NYC ceilings, odd angles and older buildings
- Costs more up front for design and labor
📦 Pre-Fabricated Ductwork
- Standard sizes, ready to install
- Faster and less expensive
- Works well in open, simple layouts
- Less flexible in complex spaces
- Poor fit can mean more air loss and weaker airflow
From Static Pressure to the Right CFM
- 01
Assessment
We look at your existing ducts, the equipment, and the rooms that aren't comfortable, and measure static pressure to see what airflow is available based on the unit's size and specifications.
- 02
Design & Sizing
Duct sizes and routes are worked out from the CFM each space needs and what the equipment can deliver, not guessed from the old layout.
- 03
Written Estimate
You get the scope and price in writing. Nothing is fabricated or installed until you approve it.
- 04
Fabrication & Install
Ducts fabricated to fit, installed, supported properly, and every joint sealed and insulated where needed.
- 05
Airflow Verified
Before we leave, we verify the airflow is at the correct CFM for your equipment, on residential and commercial jobs alike.
Get the Ducts Right Before the Install
Your ducts decide how well a new system performs. We check them as part of every installation quote.
Central air or a heat pump
Ducts sized for a furnace often can't move enough air for central AC or a heat pump. We check the existing ductwork first and tell you whether it can be reused, modified or needs replacing.
No room for ducts?
Many brownstones, row houses and pre-war apartments have no realistic path for ductwork. In those buildings a ductless mini-split is usually the better answer, and we'll tell you so rather than force a duct job that doesn't fit.
Ductwork in Every NYC Borough
Brooklyn
Brownstones, row houses, co-ops and storefronts.
Manhattan
Apartments, townhouses, offices and retail.
Queens
Homes, multi-families and businesses.
The Bronx
Single-family homes and multi-family buildings.
Staten Island
Detached homes and commercial accounts.
Ductwork FAQ
What materials are used for ductwork?
Mostly galvanized sheet metal, with aluminum, duct board and flexible duct where they suit the job. We choose based on where the duct runs, the airflow it carries and the space available.
What is static pressure, and why do you measure it?
Static pressure is the resistance the air meets as it moves through your ducts, filters and coils. Every unit is rated to move a certain amount of air against a certain pressure. Measuring it tells us what airflow is actually available from your equipment, so the ducts can be sized to deliver the correct CFM to every room.
How long does duct installation take?
A repair or a few new runs can take a few hours. A full system for a house or a commercial space can take several days. You get a schedule with the estimate.
How much does ductwork cost?
It depends on the size of the building, the materials, how accessible the space is, and how much of the existing system can be reused. We assess first and give you a written price before any work.
Can my new AC or heat pump use my existing ducts?
Sometimes. Ducts sized for a furnace are often too small for cooling or a heat pump. We check them during the installation quote and tell you whether they can be reused, modified or need replacing.
Should I repair or replace my ductwork?
If the layout and sizing are sound, sealing and repairing the problem sections is usually enough. If the ducts are undersized, badly routed or falling apart, replacement makes more sense. We'll show you what we find.
My building has no space for ducts. What are my options?
A ductless mini-split system heats and cools without ductwork and is the usual answer in brownstones and row houses. We install both, so we'll recommend whichever fits your building.
Rooms That Never Feel Right? Let's Look at the Ducts.
We'll find out where the air is going, show you what we find, and put the price in writing before any work.
Monday–Friday 7am–4pm · Saturday by appointment · Calls answered 24/7Serving all five NYC boroughs